DI-Box Mono Klark Teknik DN100 Aktiv

Beskrivning

Från tillverkaren:

The DN100 has become an established favourite amongst both engineers and musicians alike.
With its high headroom, dynamic response and sonic clarity,
DN100 faithfully reproduces the character of electric and acoustic instruments
and allows far more of the detail of musical performances to be captured.
DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles,
and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load.
This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad.
Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range,
and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.

DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics,
and in turn is covered by a tough silicone rubber sleeve.

SPECIFICATIONS

Inputs
Connectors: 2 x 1/4″ TRS and 3-pin XLR linked in parallel
Impedance: 1 MΩ nominal, balanced or unbalanced, 20 kΩ (XLR only)
Max input level: 35 dBu (with pad enabled)
Attenuator: 20 dB pad

Outputs
Connector: 3-pin XLR
Impedance: 50 Ω
Max output level: 15 dBu with 10 kΩ load
Min load: 600 Ω

System
Noise: -103 dBu, 22 Hz to 22 kHz unweighted, with input terminated by 10 kΩ resistor
Frequency response: 20 Hz to 20 kHz, ±1 dB, 10 kΩ load
Distortion (THD + N): Typically <0.005% @ 1 kHz, +10 dBu

Power Requirement
Voltage: +48 V phantom
Current consumption: <10 mA

Physical
Dimensions: 118 x 63 x 112 mm (4.7 x 2.5 x 4.4″)
Weight: 0.65 kg (1.43 lbs)